Welcome to my blog and thanks for visiting!

Thursday, January 19, 2012

Tutorial | Ribbon/Twine embellishment

Today is my turn to share something over at She's A Sassy Lady!

As I was pondering on what to share today, several ideas came to mind such as sharing current and very popular trends in Scrap-booking and Card-making like "chevrons", "dove tail banners", or the color of the year "Tangerine Tango" ... I settled for a bit of most above mentioned trends and sharing how to make your own embellishment using remnants or newly cut out ribbon and twine.
After I had tried this technique successfully with twine, I came across Nichol Magouirk's blog were she had tried it with ribbon using a Sizzix die.  So I set out to try the ribbon technique using a Spellbinders die.  I must report I was successful and now I have to try using the deep cut blade on my cutting machine!
And here is the "How-to" create such an embellishment:

Step one:  Decide on die shape and ribbon or twine to use.
Step two:  Get a piece of cardstock or? a bit larger than your die (my die is a heart from Spellbinders but any metal die will do, i.e. such as Sizzix)
Step three: Trim a bit but not too much (you just don't want to waste too much adhesive or ribbon/twine.
Step four:  Add strong adhesive to piece of trimmed cardstock.
Here a close up of the piece of cardstock completely covered with adhesive.
 Below a picture of remnants or newly cut out ribbon
Step five:  Start adhering your ribbon as desired.
Step Six: Place on cutting/embossing machine (I used a Big Shot by Sizzix).
 This is how it comes out looking like after running it through back and forth 3 times.
Step Seven: Trim any left uncut areas (I could have run it through an additional couple of times, but I only had to trim a tiny bit in couple of places-the tiny polka dot ribbon was the stubborn one!).
And here you have the end product or your personally made embellishment.  Imagine the possibilities with oh so many shapes and colors!
Here is a picture of a heart using the same technique, but with twine!
(I created this around two weeks ago, but will not post/share project until Monday for my DT post over at Timeless Twine!).

The twine is a bit more tedious to work with than the ribbon because it is thin string - you have to have more patience with it.

A few more pictures---

The brown on my card is much richer in person-

And here a tiny tutorial on how to create your own dove tail banners (which to me resemble chevrons!)

1-Decide on the width of your banner
2-Make a cut in the middle of your paper from bottom up a) you have the choice of making it as high as you want, the higher the longer your tails; b) Either measure the center of your paper or "guesstimate" (love this made up word!)
3-Make a cut from one bottom corner to the center/or top of your previous cut (diagonally)
4-Repeat on other side

As for the color of the year "Tangerine Tango", here is a sample (I don't have any on my craft room) and I am glad to report that they [Pantone] are coordinating it with green!!...and other colors of course.

Thank you so much for stopping by and I do appreciate your comments!